Toshiba 40UL605U Owner's Manual page 68

6 Press S or T to highlight Authentication, and
then press W or X to select Open System, Shared
Key, WPA-PSK or WPA2-PSK.
7 Press S or T to highlight Encryption, and then
press W or X to select None, WEP, TKIP or AES.
Note:
Certain encryption types are only compatible
with specific authentication types.
− When Authentication is Open System, only
WEP or None is compatible.
− When Authentication is Shared Key, only
WEP is compatible.
− When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
When incompatible Authentication/Encryption
pairings are attempted, a warning message
will be displayed, and no connection attempt
will be made until the incompatibility is
resolved.
Key ID of WEP encryption to set is only one.
8 Press S or T to highlight Security Key, and press
. The Software Keyboard window will appear.
9
Input the Security Key by using the Software
Keyboard ( page 70). To save your setting,
press the BLUE button.
Note: This item is grayed out when
Encryption is None.
10
Highlight Done, and then press
Note: When Encryption is None, a message
will appear. Press W or X to select Yes and
press .
Note: Settings are not saved if
before Done is selected.
Wireless Information
The settings configured in Wireless Setup can be
confirmed.
1
and open the Quick menu.
Press
2 Press S or T to select Wireless Information, and
press .
3
When the AP connection succeeds, a Wireless
Information window will appear.
Note: Press the RED button if you confirm
the situation of surrounding APs.
68
Chapter 8: Using the TV's network features
.
is pressed
Item Description
Connected is displayed when the
TV is connecting with the AP.
Status
Disconnected is displayed when the
TV is disconnecting with the AP.
Connection signal strength with AP
Signal
(STRONG / MEDIUM / WEAK)
Speed The link speed with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel A channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
The AP's MAC address is displayed
AP MAC
Address
when the TV is connecting with AP.
The MAC address of USB (Dual
USB MAC
Address
Band WLAN Adapter) is displayed.
Enabled is displayed when you use
DHCP.
DHCP
Disabled is displayed when you do
not use DHCP.
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default
Address of the Default GATEWAY
Gateway
DNS Address of the DNS
Note: Even if AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed
value might be low. Encryption is recommended
to be changed to AES ( left-hand column).
(continued)