Toshiba 40UL605U Owner's Manual page 67

Easy Setup using PBC (Push Button
Configuration)
1
From the Setup menu, highlight Network Setup
and press .
2 Press S or T to highlight Wireless Setup, and
press .
3 Press S or T to highlight Easy Setup, and press
.
4
Press W or X to select PBC.
5 Press T to highlight Start Scan, and press
6
When a window reporting that the setup
succeeded appears, press
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Then press W or X to select Yes and press
Easy Setup using PIN (Personal
Identification Number)
1
From the Setup menu, highlight Network Setup
and press .
2 Press S or T to highlight Wireless Setup, and
press .
3 Press S or T to highlight Easy Setup, and press
.
4 Press W or X to select PIN.
5 Press T to highlight Start Scan, and press
6 Press S or T to select the desired AP and press
.
Note: If a Check the MAC address on label of
the AP or the manual of it and select an AP.
7
When the PIN code window appears, enter the
displayed PIN into your AP, and then press
start the PIN Setup. When a message displays to
report that the setup was successful, press
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Then press W or X to select Yes and press
Chapter 8: Using the TV's network features
.
.
.
.
to
.
.
Assisted Setup
1
From the Setup menu, highlight Network Setup
and press .
2 Press S or T to highlight Wireless Setup, and
press .
3 Press S or T to highlight Assisted Setup, and
press .
4 Press S or T to select the desired AP and press
.
Note: If a Check the MAC address on label
of the AP or the manual of it and select an
AP.
5
Highlight Security Key and press
Keyboard window will appear.
6
Input the Security Key by using the Software
Keyboard ( page 70). To save your setting,
press the BLUE button.
Note:
The Security Key must adhere to these
conditions:
− TKIP/AES: 8-63 ASCII or 64 Hex characters
− WEP: 5 or 13 ASCII or 10 or 26 Hex
characters
Key ID of WEP encryption to set is only one.
7
Highlight Done, and then press
Note: If Network Name is not displayed,
see step 4 and 5 in Manual Setup ( the
next column) to set Network Name before
pressing Done.
Note: Settings are not saved if
before Done is selected.
Manual Setup
1
From the Setup menu, highlight Network Setup
and press .
2 Press S or T to highlight Wireless Setup, and
press .
3 Press S or T to highlight Manual Setup, and
press .
4 Press S or T to highlight Network Name, and
press . The Software Keyboard window will
appear.
5
Input the Network Name by using the Software
Keyboard ( page 70). To save your setting,
press the BLUE button.
. The Software
.
is pressed
(continued)
67