Toshiba 40UL605U Owner's Manual page 21

Note:
The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals.
Some PC models cannot be connected to this TV.
An adapter is not needed for computers with a
compatible mini D-sub15-pin terminal.
Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
Signal names for mini D-sub 15-pin connector
Pin Signal Pin Signal
No. name No. name
1 R 6 Ground
2 G 7 Ground
3 B 8 Ground
4 Reserved 9 5V
5 Reserved 10 Ground
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to-DVI adapter cable and analog
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog
cables are not necessary ( page 15).
HDMI-to-DVI
adapter
cable
Computer
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p
(60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 76.
Chapter 2: Connecting your TV
Note:
Pin Signal
No. name
11 Reserved
12 SDA
13 H-sync
14 V-sync
15 SCL
TV back panel
PC audio
cable
PC audio
output
The edges of the images may be hidden.
If receiving a 480i (HDMI), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
(continued)
21