Configuring The Multi-Channel Sound Manager - HP A524x - Pavilion - 512 MB RAM User Manual

Connect speaker plugs for:
4/4.1
2 Speaker Speaker
Mode Mode
Front speakers Front speakers
Not used for Rear speakers
speakers
Not used for Not used for
speakers speakers
Configure the audio output for the multi-channel speaker system by performing the
following procedure.

configuring the multi-channel sound manager

Click Start on the taskbar.
1
Choose All Programs.
2
Choose Music.
3
Click Multi-channel Sound Manager and then click Multi-channel
4
Sound Manager again. The Audio Configuration window opens.
If you do not see the Speaker Configuration tab, your PC does not have
NOTE:
the multi-channel capability. However, it still has two-channel (stereo) output.
Click the Speaker Configuration tab.
5
Select the option describing the number of speakers in your system, for
6
example, 6/5.1 speaker mode. You can click the Speaker Test tab and
then click a speaker icon to test it.
Click OK.
7
configuring multi-channel audio output for the
dvd player
The InterVideo WinDVD
(stereo) output. To hear all speakers from DVD movies recorded with multi-channel
audio, change the audio properties for WinDVD to match your speaker
configuration (if your InterVideo WinDVD program supports more than two
channels):
Insert a DVD, or start InterVideo WinDVD Player (see "playing dvd movies with
1
the intervideo windvd player" on page 58).
Right-click anywhere in the WinDVD video window, and then click Setup.
2
6/5.1
Speaker
Mode
Front speakers
Rear speakers
Center/
subwoofer
speakers
™
program (select models only) is set up for two-speaker
working with sound, pictures, and video
To PC Connector
connector icon
Audio Out
(lime-green)
OUT
Audio In (blue)
IN
Mic-1 (pink)
45