Using The Optional Camera Station Pc Top - HP A524x - Pavilion - 512 MB RAM User Manual

72
user's guide
4 Connect the cables to the device and place it on top of the chassis (G).
Connect the data cable to the USB or FireWire (IEEE 1394) connector on the
back of the PC. Plug the power cord for the peripheral device into a power
outlet.
E
T
F

using the optional camera station pc top

Your PC chassis may include the optional camera station feature. This feature lets
you install a special bay cover on the PC chassis for using the DockSpot camera
station (sold separately). The DockSpot includes instructions and cables.
This topic describes how to:
•
Install the special bay cover on your PC chassis.
•
Assemble the camera cradle (included with the camera) and position it on the
DockSpot.
•
Place the DockSpot into the chassis bay, and thread the cables.
•
Insert the camera.
1 Open the bay cover (A on page 70). Hold the cover on each side near the
hinges, then lift the cover and slide it toward the back of the chassis (C on page
71). Gently lift it off.
To make it easy to insert the cables during step 3, grasp the tab (T) and pull it
out toward the front of the chassis (E on page 72). Replace the tab when done
threading the cables.
G