Advertisement
BEFORE PLAYING
Power Supply
Prepare the supplied AC adapter.
* Make sure to use the supplied AC adapter. Use of different adapters may cause damage not
covered by the warranty.
z
Connect the small plug of the AC adapter to the DC 12V IN jack on the controller.
x
Plug the AC adapter into a power outlet.
Controller
MOTOR OUT
DC 12V IN
DC 12V IN
PAUSE MEMORY FUNCTION SETTING (YV-3910/3710/3700 only)
The YV-3910, YV-3710 and YV-3700 are equipped with a PAUSE MEMORY FUNCTION which
stops the fan always in exactly the same position when it is turned off (no vibrato applied).
After connection to an AC outlet, set the PAUSE MEMORY to the desired fan stop position as
follows:
z
Turn the controller power ON.
x
Press the START/STOP button once to start the fan, and
then press the START/STOP button once again to stop
the fan.
c
Remove the synchro belt by sliding it off the fan side
pulley, as shown in the illustration. Position the fan verti-
cally (fan position with strongest resonator effect) and
remount the belt.
Perform this setting for both the natural and the acciden-
tal tone side.
: YV-3910/3710/3700/2700/2700G/1600A/520
AC Adapter
AC
Set the fan to a vertical
position.
Fan
Resonator
* Wrapping the AC adapter
cord once around one of
the legs will prevent
accidental disconnection of
the adapter plug.
Slide belt
Fan Side Pulley
Synchro Belt
off.
19
Advertisement
