Advertisement
ASSEMBLY: YV-3910/3710/3700
1-1
YV-3700 : Place the large leg, small leg, pedal stay (and reinforcement stay : YV-
Low Sound
Side
Player Side
1-2
YV-3700 :
Insert the pedal stay with its notch fac-
ing up into the lower joint of the large
leg as far as it will go (aligning the notch
with the fixing bolt) and tighten the fixing
bolt securely.
* The hole next to the notch serves as a
reference for the correct insertion po-
sition.
1-3
YV-3700 :
In the same way, insert the reinforce-
ment stay with its notch facing down
into the upper joint of the large leg and
tighten the fixing bolt.
1-4
YV-3700 :
Connect the other ends of both stays
with the small leg in the same way.
8
3700) so that after assembly each part will be positioned as illustrated.
Leg (Large)
Reinforcement Stay
Pedal
Align flat surfaces.
Flat surface should
face player side.
Audience Side
Leg (Small)
Pedal Stay
Leg
(Large)
Fixing
Bolt
Leg (Large)
Notch
High Sound
Side
Tighten
Pedal Stay
Notch
Reference Hole
Pedal Stay
Advertisement
