Yamaha THR10 Owner's Manual page 16

Connecting a Computer to the Unit
2) Edit THR10/5 amp settings using the editing
application on a computer.
Download and install the THR Editor (page 14).
Use the supplied USB cable to connect the com-
puter's USB jack to the USB jack on the THR10/5
as shown in the diagram below.
The THR Editor lets you change settings (param-
eters) in the THR10/5 using the display shown
below. After editing the settings with your com-
puter, you can save them in your computer, and
create a library of sound settings. Holding down
the USER MEMORY button for a few seconds on
the THR10 saves the settings being edited to the
unit's internal memory.
* For more information on settings and operation, refer
to the THR Editor Owner's Manual or its Help file.
The THR Editor lets you
edit all parameters on the
THR10/5 freely.
On the THR10, settings
made with the THR
Editor can be saved to
USER MEMORY 1-5.
16
3) Record audio using the Cubase AI applica-
tion.
Install the Cubase AI application (page 14).
Use the supplied USB cable to connect the com-
puter's USB jack to the USB jack on the THR10/5
as shown in the diagram below.
Cubase AI lets you record what you play on a
guitar connected to the THR10/5 to a computer.
After recording, you can go back and edit the
recorded data.
* For more information on settings and operation, refer
to the THR Editor Owner's Manual or its Help file.
Use Cubase AI to record
and edit what you play
on your guitar connect-
ed to the THR10/5.