Table of Contents
Advertisement
Problems
10. The <Smoothing> cannot be
selected.
11. The Main menu of ScreenManager
does not operate.
12. The Auto Adjustment Button does
not operate.
13. The signal Selection Button does
not operate.
Points to check with possible solutions
<Smoothing> is disabled when the screen is
displayed in the 1024 x768.
The adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while
pressing the Auto Adjustment Button switch,
the power on. (p.18)
The adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while
pressing the Auto Adjustment Button switch,
the power on. (p.18)
The Auto sizing function is intended for use on
the AT-compatible PC running Windows. It may
not work properly in either of the following
cases.
• When running an AT-compatible PC on MS-
DOS (Not windows).
• The background color for the "wall paper"
or "desktop" pattern is set to black.
Some signals from a graphics board may not
function properly.
The computer with digital may be in the off
mode (power indicator flashing yellow). Try to
press the monitor's power switch and press the
Input Signal Selection Button again.
6. TROUBLESHOOTING
English
31
Advertisement
Table of Contents
