Grayed-Out Node - Yamaha mLAN Owner's Manual

C Error indicator
Indicates whether the signal is being transmitted or received correctly.
: Signal is being transmitted or received correctly.
: An error has occurred. Click the indicator to display details about the error.
D IN/OUT connectors
These connectors represent audio, MIDI and wordclock inputs and outputs in the Audio, MIDI and
Wordclock Connection windows. To change connections, click a connector to display the
corresponding Input or Output window (page 9). The window indicates the node connectors and
magnified connectors to which virtual cable connectors are connected.
E Node nickname
You can assign nicknames to nodes (page 18). If a nickname is not assigned, the product model
name (page 18) appears.
F Sample rate
Displays the current operating sampling (wordclock) frequency (44.1 kHz, 48 kHz, 88.2 kHz, or
96 kHz).
G Master/Slave number
Displays the wordclock master or slave number.
H M(aster) button
The button indicator lights up when the node is operating as master. The button indicator turns off
when the node is operating as a slave. To switch the node from slave to master, click this button to
turn on the indicator (page 27).

Grayed-out Node

If mLAN Graphic Patchbay fails to detect a node that had been recognized before you updated the
information, the node will be grayed-out and unavailable for settings adjustments. In this case, right-
click the grayed-out node (on a Macintosh, click the node while holding down the <Ctrl> key) to
display the [Delete] pop-up menu. Click the [Delete] button to delete the node.
14