Disconnecting Connectors - Yamaha mLAN Owner's Manual

3. Click the [Connect] button. The selected input and output connectors connect to
each other. The Destination Connector List section displays each input connector
that is now connected to a corresponding output connector listed in the Audio Out
or MIDI Out column.
If the input connectors and output connectors are connected incorrectly, the
NOTE
[Connect] button will be grayed-out.

Disconnecting Connectors

This section explains how to disconnect audio and MIDI connectors.
1. Select the connector you wish to disconnect in the Audio Out or MIDI Out sections
or in the Destination Connector List section.
To disconnect multiple connectors simultaneously (group disconnection), click the first output
connector in the group to be disconnected, then hold down the <Shift> key on the computer
keyboard and click the last connector in the group.
The selected connectors are highlighted in the list.
2. Click the [Disconnect] button.
The selected connectors are disconnected.
37