Connecting The Ac Adaptor; Part Names - Yamaha GB1K Owner's Manual

Connecting the AC Adaptor

1
Connect the AC adaptor to the DC IN
12V socket at the rear of the control
box.
2
Loop the cord through the hook on the
piano, as shown.
3
Connect the AC adaptor to the AC wall
outlet.
Caution
• Use the Yamaha PA-5D/PA-150 AC adaptor.
• Do not stretch the cord or bend its ends.
• Do not attempt to use the cord if it is stretched or if the ends
of the cord have been bent. Attempting to do so may cause
interruptions to the power supply.
• Always turn off the main unit power before disconnecting the
AC adaptor.
• When you wish to move the Silent Piano, unplug the AC
adaptor from the AC outlet and disconnect it from the DC IN
12V socket at the rear of the control box before proceeding.
• Unplug the AC adaptor from the AC outlet if you do not
intend to use the instrument for an extended period of time.

Part Names

■ Control box-Front panel
1
1
Power switch (POWER)
Used to turn the digital piano on and off.
2
Reverb control (REVERB)
Adjusts the amount of reverb.
2
2 3 4
3
Adjusts the volume for both headphones
simultaneously.
4
You can connect two stereo headphones, allowing you
to share your playing with another person.
1
Volume control (VOLUME)
Two headphone sockets (PHONES)