Before Using The P-90; Music Rest; Connecting The Ac Power Adaptor And External Equipment - Yamaha P-90 Owner's Manual

Before using the P-90

Music Rest

Attach the music rest to the instrument by inserting it into the slot at the rear
of the control panal.
Connecting the AC Power Adaptor and external
equipment
SUSTAIN
5
DC IN 12V
1
DC IN 12V
1 [DC IN 12 V] connector
Connect the included PA-3C AC Power Adaptor here.
1. Make sure that the [STANDBY/ON] switch is off (in the "STANDBY"
position).
2. Insert the plug of the PA-3C cable into the [DC IN 12V] connector.
3. Plug the PA-3C into an AC outlet of the correct voltage.
When disconnecting the PA-3C, you must reverse this procedure.
WARNING
Use ONLY a Yamaha PA-3C AC Power Adaptor (or other adaptor specifi-
cally recommended by Yamaha) to power your instrument from the AC
mains. The use of other adaptors may result in irreparable damage to both
the adaptor and the P-90.
WARNING
Unplug the AC Power Adaptor when not using the P-90, or during electri-
cal storms.
IN MIDI OUT HOST SELECT
MIDI Mac
PC-2 PC-1
6 7
STANDBY / ON
OUTPUT
2 3
L R L /L+R
TO HOST
PHONES
4
R
DC IN 12V
AC outlet
PA-3C
Before using the P-90
P-90
9