Yamaha Clavinova CVP-601 Reference Manual page 12

[4]/
[5]
[6]
[7]
2
 CONTROLLER Page
1 CENTER PEDAL
2 LEFT PEDAL
These allow you to select the function to be assigned to the center or left pedal.
[1]
[2] –
[8]
3 MODULATION
When a pedal function is assigned to MODULATION, the pedal can be used to modulate the parameters
below as well as the pitch (vibrato). Here, you can set the degree to which the pedal modulates each of the
following parameters.
[2]
[3]
[5]
[6]
[7]
12 CVP-601 Reference Manual
PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves. When
the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2
parameter is available; when the edited Voice is used as the LEFT part,
the LEFT parameter is available.
MONO/POLY Determines whether the edited Voice is played monophonically or poly-
phonically.
PORTAMENTO Sets the portamento time (pitch transition time) when the edited Voice is
TIME set to "MONO" above.
The Portamento Time determines the pitch transition time. Portamento is a function that creates a
NOTE
smooth transition in pitch from the first note played on the keyboard to the next.
FUNCTION Selects the function to be assigned to the center or left pedal. For details
on the pedal functions, see
RIGHT 1, Determines whether the assigned function is effective or not for the
RIGHT 2, LEFT, respective keyboard part. This also determines the depth for the
etc. function. For details, see
FILTER Determines the degree to which the pedal modulates the Filter Cutoff
Frequency. For details about the filter, see
AMPLITUDE Determines the degree to which the pedal modulates the amplitude (vol-
ume).
LFO PMOD Determines the degree to which the pedal modulates the pitch, or the
vibrato effect.
LFO FMOD Determines the degree to which the pedal modulates the Filter modula-
tion, or the wah effect.
LFO AMOD Determines the degree to which the pedal modulates the amplitude, or
the tremolo effect.
page 78.
page 78.
page 13.