Table of Contents
Advertisement
2.7.5
APM Configuration
EuP Ready [Disabled]
[Disabled]
Disables the Energy Using Products (EuP) Ready function.
[Enabled]
Allows BIOS to switch off some power at S5 state to get system ready for
the EuP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Restore On AC Power Loss [Power Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PCI/PCIE Device [Disabled]
[Disabled]
Disables the PME to wake up from S5 by PCI/PCIE devices.
[Enabled]
Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PS/2 Devoces [Disabled]
[Disabled]
Disables the Power On by a PS/2 devices.
[Enabled]
Enables the Power On by a PS/2 devices. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Power On By Ring [Disabled]
[Disabled]
Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled]
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By RTC Alarm [Disabled]
[Disabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and RTC Alarm
[Enabled]
Time (HH:MM:SS) will become user-configurable with set values.
2.7.6
Hardware Monitor
CPU/MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select [Ignored] if you do not wish to display the detected temperatures.
Chapter 2: BIOS setup
2-21
Hide quick links:
Advertisement
Table of Contents
