Adding Guest Networks - NETGEAR WNR2200 - N300 Wireless Router User Manual

• WPS Settings. For information about WPS settings, see
Configure Your Wireless Network" on page
• Restricting access by MAC address. You can use a Wireless Card Access List to restrict
access. See "Restricting Access by MAC Address" on page

Adding Guest Networks

Adding a guest network allows visitors at your home to use the Internet without having to know
your wireless security key. You can add a guest network to the wireless network.
To add a guest network, do the following:
1. Select Guest Network from the Setup menu. The Guest Network Settings screen appears
Figure 2-10
2. Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
Safeguarding Your Network
N300 Wireless Router with USB WNR2200 User Manual
2-12.
v1.0, September 2010
"Using Push 'N' Connect (WPS) to
3-2.
2-20