Figure 7-2
You can also type \\readyshare in the address field of your Web browser.
Note: If you logged in to the router before you connected your USB device, you might
not see your USB device in the router screens until you log out and then log back in
again.
The following table explains the fields and buttons in this screen:.
Table 7-1. USB Storage Basic Settings
Fields and Buttons
Network Device Name
Available Network
Share Name
folders
Read/Write
Access
Folder Name
Volume Name
Total/Free
Space
USB Storage
N300 Wireless Router with USB WNR2200 User Manual
Description
The default is \\readyshare. This is the name used to access the
USB device connected to the router.
If only 1 device is connected, the default share name is
USB_Storage. You can click the name shown or you can type it in
the address field of your Web Browser. If Not Shared is shown, the
default share has been deleted and no other share for the root
folder exists. Click the link to change this setting.
Shows the permissions/access controls on the network folder: All –
no password (the default) allows all users to access the network
folder. The user name (account name) for All – no password is
guest. The password for admin is the same one that you use to
log in to the router main menu. By default, it is password.
Full path used by the network folder:
Volume name from the storage device (either USB drive or HDD).
Shows the current utilization of the storage device.
v1.0, September 2010
7-5