Configuring Your Internet Connection - NETGEAR WNR2200 - N300 Wireless Router User Manual

3. Enter the settings for the IP address and DNS server. If you enter or change a DNS address,
restart the computers on your network so that these settings take effect.
4. If no login is required, you can specify the MAC Address setting.
5. Click Apply to save your settings.
6. Click Test to test your Internet connection. If the NETGEAR website does not appear within
one minute, see Chapter 8,
When your Internet connection is working, you do not need to launch the ISP's login program on
your computer to access the Internet. When you start an Internet application, your wireless router
automatically logs you in.
The fields that are displayed depend on whether or not your Internet connection requires a login.
ISP does not require login
Figure 1-6
The following table explains the fields in the Basic Settings screen.

Configuring Your Internet Connection

N300 Wireless Router with USB WNR2200 User Manual
"Troubleshooting".
ISP does require login
v1.0, September 2010
1-7