NETGEAR WNR2200 - N300 Wireless Router User Manual page 133

1. Select Wireless Settings under Setup in the main menu of the WNR2200 router.
Figure 8-1
2. Make sure the Enable SSID Broadcast check box is selected.
3. For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you configure in
the N300 Wireless Router with USB WNR2200. If they do not match, you will
not get a wireless connection to the WNR2200 router.
4. Select the region in which the wireless interface will operate.
5. Set the channel. The default channel is Auto.
Troubleshooting
N300 Wireless Router with USB WNR2200 User Manual
v1.0, September 2010
8-11