Section V - Others; How To Reset The Unit - Oregon Scientific RRM968P Instruction Manual

2. To change to view the preset alarm time instead of the current
time, press [SNOOZE/LIGHT] again when projection is on.
Projector Features
3. Adjust the projected image as below.
Feature Effect
Adjustable Rotates the Tilt swivel projection
Projection projection 180° housing to alter the
direction of projection
Focuses Rotate Dial D2 to focus
FOCUS
projection projection
Knob
IMAGE Dial D3 rotates Rotation of projection
ROTATION projection allows user to place
KNOB clock in convenient
°
180 Button D1 Flips an image to
ROTATION horizontally flips maintain an upright
BUTTON the projection position
180°
For continuous projection, you must connect it with power adapter.
When the power adapter is connected to the unit, the projection
will be activated and remain so by sliding on the [PROJECTION
ON ] switch.
To deactivate the feature, slide the switch back to its off position.
To increase the life-time of the projection LED, it is suggested to
10
RRM968PM_EN_R0
slide the [ PROJECTION ON
during daytime.
Section V — Others
Instructions
To turn on the EL backlight of the LCD Display, press [SNOOZE/
LIGHT] to turn it on for 5 seconds.

HOW TO RESET THE UNIT

Press [RESET] to reset the settings when the unit is malfunctioning
When [RESET] is pressed, all settings will return to the default
values and memory records will be erased.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted parts.
10
] switch to the "off" position
BACKLIGHT
7/7/04, 11:01 AM