Section V - Others; How To Reset The Unit - Oregon Scientific RRM968P User Manual

3. Adjust the projected image as below.
Projector Features
Feature Effect
Adjustable Rotates the Tilt swivel projection
Projection projection 180° housing to alter the
direction of projection
Focuses Rotate Dial D2 to focus
FOCUS
projection projection
Knob
IMAGE Dial D3 rotates Rotation of projection
ROTATION projection allows user to place
KNOB clock in
location
°
180 Button D1 Flips an image to
ROTATION horizontally flips maintain an upright
BUTTON the projection position
180°
For continuous projection, you must connect
When the power adapter is connected to the unit, the
will be activated. To maintain projection, slide the [PROJECTION
ON ] switch to the "On" position.
To deactivate the feature, slide the switch back to the "Off" position.
it is recommended that to increase the life-time of the projection LED
10
RRM968PM_EN_R03
you keep [ PROJECTION ON
daytime.
Section V — Others
Instructions
BACKLIGHT
To turn on the EL backlight of the LCD Display
[SNOOZE/LIGHT].

HOW TO RESET THE UNIT

Press [RESET] to reset the settings
a convenient
When [RESET] is pressed, all settings will return to the default
values and memory records will be erased.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
the power adapter.
1. Do not immerse the unit in water. If you spill liquid over it, dry
projector
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted parts.
10
8/23/04, 10:40 AM
] in the "off" position during
for 5 seconds press
if the unit is malfunctioning