Using The Card; Inserting Or Removing The Card - SimpleTech STI-FAX/14.4V User Manual

4. Using the Card

This chapter provides information on the following topics:
• Inserting and Removing the Card
• About Call Waiting
• AT Command Summary
• Protecting the Card

Inserting or Removing the Card

This section consists of Inserting or Removing the Card with Windows 3.x
and OS/2 Warp, Inserting or Removing the Card with Windows NT, Inserting
or Removing the Card with Windows 95 and Inserting or Removing the Card
with MacOS System 7. Refer to the section appropriate to your operating
system.
Inserting or Removing the Card with Windows 3.x and OS/2 Warp
You can insert the card anytime. You can remove the card anytime the
computer is not accessing the card. Some computers will beep when the
computer recognizes the change in status of the PC Card socket. To remove
the card, proceed as follows:
• If your computer has an eject button on the PC Card socket, press the
button to release the card. Then, pull the card from the socket.
OR
• If your computer does not have an eject button on the PC Card
socket, carefully pull the card straight out from the socket.
Proceed to About Call Waiting.
Inserting or Removing the Card with Windows NT
You must insert the card before booting into Windows NT. To remove the
card, you must first exit Windows NT, then proceed as follows:
• If your computer has an eject button on the PC Card socket, press the
button to release the card. Then, pull the card from the socket.
OR,
• If your computer does not have an eject button on the PC Card
socket, carefully pull the card straight out from the socket.
Proceed to About Call Waiting.
User Guide
Page 25