SimpleTech STI-FAX/14.4V User Manual page 23

Line Access Cable
!
If the SimpleJack connector is not appropriate for your
application, you may use the optional line access cable (Simple
Part Number STI-FAX/CCBL). For purchasing information, call
1-800-4SIMPLE.
Refer to Figures 3-4 and 3-5 and Proceed as follows:
1. If you are using the 33.6 Communicator with SimpleJack: attach
the line access cable to the connector on the left).
Or,
If you are using the 33.6 Communicator or the 14.4
Communicator, attach the line access cable to the only
connector on the bottom of the card.
2. Attach a phone line to the wider, two-wire jack in the Line
Access Cable.
3. If you want to use the voice features and your computer does
not have a microphone and speaker, attach a handset to the
narrower, four-wire jack in the line access cable.
!
There is no industry standard for the signal polarity of handsets;
therefore, the handset jack does not work with all handsets.
Proceed to Installing the Communications Software.
Connector for the PC Card
Connector for Optional Line
Access Cable and Optional
Cellphone Cable
Figure 3-5. 33.6 Communicator with SimpleJack Cable Connectors
Figure 3-4. The Line Access Cable Connectors
User Guide
To Handset
To Phone Line
0109
0215
Page 23