Attaching The Cables - SimpleTech STI-FAX/14.4V User Manual

Attaching the Cables

Refer to SimpleJack, Line Access Cable, or Cellphone Cable (Windows 3.x and
Windows 95 Only) depending on your installation requirements
!
If both a phone line and a cellphone are attached to the
33.6 Communicator with SimpleJack, the 33.6 Communicator with
SimpleJack will ignore the phone line and use the cellphone.
SimpleJack
Lift the hinged top of the SimpleJack connector and attach a phone line
(see Figure 3-2). If there is no room to open the jack, slide the jack out and
attach the jack to the connector on the right (see Figure 3-3 on the next
page); then, attach the phone line.
Figure 3-2. Attaching the Card
Lift the hinged top.
Attach a phone line.
User Guide
0216
0217
Page 21