SimpleTech STI-FAX/14.4V User Manual page 20

Communicator
Windows 95
Proceed as follows:
1. Start Windows 95.
2. Plug the PC Card into the PC Card socket.
3. The computer will respond with a beep, and with a picture of
the PC Card on the right of the task bar.
Or,
Windows may respond with some dialog boxes. Follow
on-screen prompts. If the "New Hardware Found"
window similar to that shown in Figure 3-1 appears, insert
the"Modem Install Diskette" that came with the PC Card.
Make sure "Driver from disk provided by hardware
manufacturer" is selected, then click on "OK." Follow the
on-screen prompts. If additional drivers are required,
Windows 95 may ask you to insert the original diskettes of
Windows 95. Once this is done, the PC Card will be
automatically recognized and configured when you plug
in the PC Card. (Note that the New Hardware Found
window may refer to the 33.6 Communicator with
SimpleJack and the 33.6 Communicator as the 28.8
Communicator.)
Figure 3-1. The "New Hardware Found" Window
Mac OS
Proceed as follows:
1. Start MacOS System 7.
2. Plug the PC Card into the PC Card socket.
3. The computer will respond with a beep and will mount the PC
Card icon on the desktop.
Page 20
0200