Panasonic DMC LZ1 - Lumix Digital Camera Operating Instructions Manual page 51

■ To change mode
Press [MENU/SET], select mode with e/r
and press [MENU/SET] again.
You can move to the recording menu or
SETUP menu. Select [A/S/M] icon with w
and select [ ] (Recording menu) or [
(SETUP menu) with r.
■ Aperture-priority AE setting value
Aperture value
setting (with 1/3 EV
step)
F3.5, F3.3
F5.0, F4.5, F4.0
F7.1, F6.3, F5.6
F8.0
■ Shutter-priority AE setting value
Shutter speed
setting value (sec.)
(with 1/3 EV step)
8, 6, 5, 4, 3.2, 2.5,
2, 1.6, 1.3, 1, 1/1.3,
1/1.6, 1/2, 1/2.5,
1/3.2, 1/4, 1/5, 1/6,
1/8, 1/10, 1/13, 1/15,
1/20, 1/25, 1/30,
1/40, 1/50, 1/60,
1/80, 1/100, 1/125,
1/160, 1/200, 1/250,
1/320, 1/400, 1/500,
1/640, 1/800, 1/1000
1/1300
1/1600
1/2000
■ Manual exposure setting value
Aperture value
setting (with 1/3 EV
step)
F3.3 to F3.5
F4.0 to F5.0
F5.6 to F7.1
F8.0
Advanced-Shooting
]
Shutter speed
setting (sec.)
8 to 1/1000
8 to 1/1300
8 to 1/1600
8 to 1/2000
Aperture value
setting
F3.3 to F8.0
F4.0 to F8.0
F5.6 to F8.0
F8.0
Shutter speed
setting (sec.) (with
1/3 EV step)
60 to 1/1000
60 to 1/1300
60 to 1/1600
60 to 1/2000
• Each setting value is the one shown at
the end of Zoom W. Depending on the
zoom position, some values cannot be
selected.
• The LCD brightness may differ from
the brightness for actual pictures taken.
Playback and confi rm.
• If optimum exposure cannot be achieved,
the aperture value and shutter speed
value turn to red.
• Using tripod is recommended when the
shutter speed is slow.
• When shutter-priority AE is set, you
cannot make the following settings.
– Flash: Slow sync./Red-eye reduction
– Intelligent ISO
• When manual exposure is set, you
cannot make the following settings.
– Flash: Slow sync./Red-eye reduction
– Intelligent ISO
– Compensating exposure
• If you set the ISO sensitivity to [AUTO]
while manual exposure mode, the
camera automatically selects [ISO100].
( P48 )
51
VQT1L86