M/Ft; Scene Menu; Dial Display; Format - Panasonic DMC LZ1 - Lumix Digital Camera Operating Instructions Manual

Press [ ] to display menu, enter the setup menu [
The setting marked "q" means it is the initial setting.

m/ft

Set the unit to display available recording
range
m: displayed in meter
q ft: displayed in feet
SCENE MENU ( P52 , 55 )
Setup the screen in advanced scene mode
or scene mode
OFF:
Displays scene currently
selected
q AUTO: Displays scene selection
screen

DIAL DISPLAY

Set whether the mode dial position is
displayed on screen when turning the
mode dial.
OFF
q ON
Initializing the built-in memory or
a card.

FORMAT

Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears. Use batteries with suffi cient
power when formatting.
• Once formatting has been completed,
all data including protected pictures
will be deleted. Make sure not to
delete them before formatting
• When the card is not inserted, built-in
memory can be formatted. When the card
is inserted, the card can be formatted.
• Do not turn the camera off during
formatting.
• It may take longer to format the built-in
24
VQT1L86
Preparation
] and select the item.
memory than the card. (Max. about 15 sec.)
• You cannot format an SD Memory Card
or an SDHC Memory Card when the
card's Write-Protect switch set to [LOCK].
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
For USA assistance, please call:
1-800-211-PANA (7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or send e-mail to:
lumixconcierge@ca.panasonic.com

LANGUAGE

{
Set to the language on the menu screen
from the following languages.
q [ENGLISH]: English
[DEUTSCH]: German
[FRANÇAIS]: French
[ESPAÑOL]: Spanish
[ITALIANO]: Italian
[繁體中文]:
[ ]:
* Available in Canada only
• When you set to other language by
mistake, select [
to set the desired language.
( P20 )
Chinese (Traditional)*
Japanese
] from the menu icons
{