Eiki LC-SD15 Owner's Manual page 39

Logo PIN code lock
This function prevents an unauthorized person from changing the
Logo setting.
Off . . . . . . . the Logo setting can be changed freely with the
Logo function. (p40)
On . . . . . . . the Logo setting cannot be changed without the
Logo PIN code.
If you want to change the Logo PIN code lock setting, enter a
Logo PIN code along the following steps. The initial Logo PIN code
is set "4321" at the factory.
Enter a Logo PIN code
Select a number by pressing the Point
number with the SELECT button. The number will change to
"✳". If you fixed a wrong number, move the pointer to "Set" or
"Clear" once by pressing the Point
"Logo PIN code". Enter the correct number.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button so that
you can change the Logo PIN code lock setting.
If you enter a wrong Logo PIN code, "Logo PIN code" and the
number (✳✳✳✳) will turn red and disappear. Enter a Logo PIN
code all over again.
To Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Select "Logo PIN code change" with the Point
button and press the SELECT button. Set a new Logo PIN
code.
Be sure to note the new Logo PIN code and keep it at hand. If
you lost the number, you could no longer change the Logo PIN
code setting. For details on PIN code setting, refer to the
relevant instructions of the PIN code lock function on page 43.
7 8 buttons and fix the
d button, and then return to
d
Logo PIN code lock
Logo PIN code lock Dialog Box
After a correct Logo PIN code is entered, the following
dialog box will appear.
Select On/Off by pressing the Point 7 8 buttons or
change the Logo PIN code.
Setting
Pointer
39