How To Operate The On-Screen Menu - Eiki LC-SD15 Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
1
Press the MENU button to display the On-Screen Menu.
2 Press the Point
Press the Point
3 Press the SELECT button to show the item data. Press the
Point 7 8 buttons to adjust the data. Refer to the following
pages for each adjustment.
✔
Note:
• The selected item is not active until the SELECT button is pressed.
20
7 8 buttons to select a Menu icon to adjust.
buttons to select an item to adjust.
ed
On-Screen Menu
Pointer (red frame)
Press the Point d button to
move the pointer.
Item
SELECT
button
Quit
Exit this menu.
Remote Control
MENU button
Top Control
ON- OFF
Menu icon
Menu bar
Pointer
(red frame)
Item data
Press the Point 7 8 buttons
to adjust the value.
POINT buttons
SELECT button
POINT button
(outer ring)
WARNING
POWER LAMP
REPLACE
INPUT
MENU button
MENU
SELECT
SELECT button