Table of Contents
Advertisement
ZOOM BUTTON
Used to adjust zoom.
(P20)
FOCUS BUTTON
Used to adjust focus.
(P20)
MUTE BUTTON
Used to mute sound.(P21)
NO SHOW BUTTON
Used to turn the picture
into black image. (P21)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P24)
Remove the battery
1
compartment lid.
Press the lid down-
ward and slide it.
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with an used battery.
Avoid contact with water or liquid.
Do not expose Remote Control Unit to moisture, or heat.
Do not drop Remote Control Unit.
If a battery has leaked on Remote Control Unit, carefully wipe the case clean and load new batteries.
ON-OFF
VOLUME BUTTON
FOCUS
ZOOM
VOLUME
Used to adjust volume.
(P21)
D.ZOOM
MUTE
INPUT
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
MENU
resize image. (P29)
LASER
FREEZE BUTTON
Used to freeze the picture.
KEYSTONE
(P21)
NO SHOW
FREEZE
IMAGE BUTTON
AUTO PC ADJ.
IMAGE
Used to select image
P-TIMER
level. (P27, 32)
KEYSTONE BUTTON
Used
keystone distortion.
(P20, 35)
Remote Control Batteries Installation
Slide the batteries into
2
the compartment.
BEFORE OPERATION
Operating Range
Point Remote Control Unit toward
projector
whenever pressing any button.
Maximum operating range for
Remote Control Unit is about 16.4'
(5m) and 60° in front and rear of the
projector.
16.4'
(5 m)
16.4'
(5 m)
to
correct
Replace the compartment
3
lid.
Two AA size batteries
For correct polarity (+
and –), be sure the
battery terminals are in
contact with the pins in
the compartment.
(Receiver
Window)
60°
60°
15
Advertisement
Table of Contents
