Sony HMZ-T2 Reference Manual page 16

Attaching and Replacing
Earbuds
Bass may be inaudible unless earbuds fit
well. For a better listening experience, try a
different earbud size or adjust the position
of the earbuds, so that they fit perfectly in
your ears.
Medium-sized earbuds are initially attached
to the headphones, at the time of purchase.
If the earbuds feel uncomfortable, try
replacing them with the supplied large or
small earbuds. Earbud sizes are color-coded
and can be identified by the color inside.
To avoid having the earbuds come off in
your ear, be sure to attach earbuds securely
to the headphones when replacing them.
Earbud sizes (inside color)
Small
S
(Orange)
To detach an earbud
While holding the headphone securely, twist the
earbud as you pull it off.
Tip
• If the earbud slips in your fingers and remains
attached, try holding it with a dry cloth for a
better grip.
16
Colored parts
?
M L
(Green) (Light blue)
To attach an earbud
Twist the earbud as you push the colored inner
part over the headphone stem, until the stem is
fully covered.
Replacing Consumables
The following replacement parts are
available.
• Earbuds*
• Forehead supporter cover
• Light blocker (Top) (1 each for the left
and right)
• Light blocker (Bottom)
• Connecting cord holder
When these consumables break or show
signs of wear, consult your nearest Sony
dealer or Sony service center.
Large
* Purchase small, medium, or large earbuds as
needed.