Page of 2

Sony HMZ-T2 Startup Manual

Head mounted display.
Hide thumbs
   
Head Mounted Display
Startup Guide
Before use, also refer to "Health Precautions" and "Precautions" in the
"Reference Guide."
HMZ-T2
1
Connect
Connect playback equipment and a TV.
Blu-ray Disc
TM
player
Game console
HDMI
OUT
Playback
Equipment
If your playback equipment has only one HDMI OUT
jack, you can still watch video from the playback
equipment on the television by connecting the
television to the processor unit with a High-Speed
HDMI cable. In this case, set "HDMI pass-through" in
"General Setup" to "On."
Note
 HDMI pass-through does not enable
simultaneous video playback on the head
mounted unit and TV.
Connect the head
mounted unit.
Head mounted
unit
TV
HDMI
IN
HDMI cable (supplied)
Processor unit (Back)
Processor unit (Front)
Resolving lack of audio,
video, or 3D playback from a
PlayStation ® 3 (PS3™)
Audio and video issues may occur when changing the output of the
PS3™ with either following method.
 Changed the output to this system using the system's HDMI pass-
through function.
 Changed the output to this system, connecting PS3™ and this
system directly, after using PS3™ with TV.
In this case, while the system is on, turn off the PS3™, and then hold
the PS3™ power button for at least 5 seconds (until you hear another
beep) to restart it.
"PlayStation" is a registered trademark of Sony Computer Entertainment
Inc. Also, "PS3" is a trademark of the same company.
What's in the box
Head mounted unit
Processor unit
Connect the supplied headphones.
Fit the right cord into the groove. (Tucking
the cord under the tabs in several places
will help keep the cord in place.)
Pass the left cord
behind the tab.
Insert the stereo
mini-plug of the
headphones fully into
the headphone jack.
Connect the AC
power cord (mains
lead) and plug it in.
Turn the system on ().
The power indicator on the processor unit is now
lit in green.
Turn the playback equipment on ().
AC power cord
(mains lead)
Accessories
Headphones
HDMI cable
Documentation
© 2012 Sony Corporation Printed in Japan
4-439-021-11(1)
Pass the right cord
behind the tab.
Tip
 If you prefer, you can connect your
own stereo mini-plug headphones
instead.
To wall outlet
AC power cord
(mains lead)
(supplied)
2
Wear
Continued in

   Also See for Sony HMZ-T2

Comments to this Manuals

Symbols: 0
Latest comments: