Printer Connection; On/Off Switch - VTech Power Vision User Manual

Learning toy

Table of Contents

PRINTER CONNECTION

1. Turn OFF your VTECH

2. Plug the connector at the end of the printer cable into the printer port on the rear

of the unit.

3. Turn ON the VTECH

animation, select an activity. If you are using another printer, press SHIFT and the

PRINTER SETUP keys together to access a list of compatible printers.

recommend using the VTECH

4. Scroll through the list using your mouse or the directional arrow keys. When you

have highlighted the appropriate printer, press ENTER.

5. Press SHIFT and PRINT DATA / PRINT SCREEN keys together to perform the printing

function when the option is available.

Before selecting a printer, make sure the printer is correctly connected to the VTECH

Power Vision learning unit using the printer cables. After setting up the printer, you can print

where the option is available.

Should you have any questions, please call our Consumer Services Department at 1-800-

521-2010 in the U.S. or 1-800-267-7377 in Canada.

Turn on your VTECH

the base unit below and to the right of the screen. The unit will display an opening animation

and ask you to select a mode to play. Turn the unit OFF by pressing the OFF button located

next to the ON button.

RESET FUNCTION

If the unit suddenly stops working, press RESET on the bottom of the unit to restart.

AUTOMATIC SHUT-OFF

If there is no input into the VTECH

the unit will automatically shut off to save power. After the unit has automatically shut off, you

will need to press the ON button again to restart the unit. We recommend that you turn the

unit OFF when not playing with it. If the VTECH

used for a long period of time, remove the batteries and unplug the adaptor.

Power Vision learning unit.

Power Vision learning unit and the printer. After the opening

Canon BJC-255, made specifically for VTECH

Power Vision learning product by pressing the ON button located on

Power Vision learning unit for approximately 8 minutes,

Power Vision learning unit is not going to be

Table of Contents