Mouse Overview; Cleaning The Mouse - VTech Power Vision User Manual

MOUSE OVERVIEW

Mouse
buttons
Once the mouse is installed you may move the mouse cursor around the screen freely. The
mouse has a roller ball in it and therefore it should be used on a flat surface. A mouse pad
provided is ideal, but you may also try a piece of paper, notebook or magazine. A clean flat
surface is important to be able to use your mouse effectively.
Your mouse is very easy to use. To use the mouse, push it in the direction that you would like
the pointer on the screen to move. To move the pointer to the right side of the screen, push
the mouse to the right. To move the pointer to the left side of the screen, push the mouse to
the left. To move the pointer to the top of the screen, push the mouse away from you. To
move the pointer to the bottom of the screen, pull the mouse towards you.

CLEANING THE MOUSE

To clean the mouse, you need to open the cover on the bottom of the mouse by using a
screwdriver. Twisting in the direction of the arrows will release the cover. Once the cover is
removed, the mouse ball should be taken out and the contents inside the mouse should be
cleaned with a dry cloth. The mouse ball should also be cleaned with a dry cloth. Once you
have finished cleaning the mouse, place the mouse ball back into the mouse, place the cover
back on the mouse and screw the cover back onto the mouse.
4
Cover