Cisco UC560-FXO-K9 Quick Start Manual page 19

Enter 192.168.10.1 in the Starting IP Address field.
S 5
TEP
This is the default IP address for the UC 560.
Click Start.
S 6
TEP
When prompted, enter the username and password for the
S 7
TEP
UC 560 and click OK.
The default username is cisco and the default password is cisco.
Passwords are case sensitive.
If prompted for the login information for a connected ESW switch,
S 8
TEP
enter the switch username and password. CCA will automatically
discover the device.
The switch default username is cisco and the default password
is cisco.
When CCA discovers both the UC 560 and ESW switch (if
S 9
TEP
installed), click OK.
Using the Telephony Setup Wizard
When CCA connects to the UC 560, the Telephony Setup Wizard
automatically launches. You can also run the Wizard by choosing
Home >Telephony Setup Wizard. The wizard guides you through the
steps needed to configure a basic telephony solution for a Cisco Smart
Business Communications System.
Before you begin:
• Gather the information listed in the Welcome window. This is important
information about what you must do and know before running the
wizard.
• If you are setting up the system for a locale other than US/English, click
View Localization Instructions and follow the instructions to download
and install the language files to your PC.
Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide 17