Cisco UC560-FXO-K9 Quick Start Manual page 11

To mount the UC 560 in a rack, follow these steps:
Attach a rack–mount bracket to one side of the chassis with the
S 1
TEP
supplied screws and secure the bracket tightly.
Do not overtorque the screws. The recommended torque is 6 to 8
in-lb (0.7 to 0.9 N-m).
Follow the same steps to attach the other bracket to the opposite
S 2
TEP
side.
After the brackets are attached to the unit, use suitable screws to
S 3
TEP
securely attach the brackets to any standard 19-inch rack.
Left bracket
for 19-inch rack
Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
Right bracket
for 19-inch rack
9