Rack Mounting - Cisco UC560-FXO-K9 Quick Start Manual

3
Installing the UC 560
Before you install the UC 560, review the
Safety Information for Cisco Unified Communications 500 Series Model
UC 560 for Small Business
Only install supported Voice Interface Cards (VICs) into the VIC
N
OTE
expansion slot of the UC 560. For a list of these cards, see the
Cisco Unified Communications Model UC 560 Platform
Hardware Reference Guide.
You can place the unit on a desktop or install it in a rack. If you choose the
desktop option, install the four rubber feet (included) on the bottom of the
unit place it on a flat surface.
The UC 560 is not to be wall mounting because of the weight
C
AUTION
of the device.

Rack Mounting

You can mount the UC 560 in any standard size, 19-inch (about 48 mm)
wide rack. It requires 2 rack units (RU) of space, which is 3.50 inches (9 mm)
high.
Placement Tips
• Ambient Temperature—To prevent the device from overheating, do
not operate it in an area that exceeds an ambient temperature of 104°F
(40°C). Do not block or cover the vents.
• Air Flow—Make sure that there is adequate air flow around the device.
• Mechanical Loading—Check that the device is level and stable to
avoid any hazardous conditions.
• Reliable Grounding—Make sure that the unit is grounded and uses
suitable electrical supply connections.
8 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
Regulatory Compliance and
on your product CD.