Getting Started With The Configuration - Cisco UC560-FXO-K9 Quick Start Manual

6
Getting Started with the
Configuration
After you install the UC 560, you configure it by using Cisco
Configuration Assistant (CCA). CCA is an easy to-use application used to
configure, manage, and administer your UC 560 and other devices in the
Cisco Smart Business Communications System. It provides everything you
need to quickly set up a small office network.
Only use CCA to configure your device. Using the Command-
N
OTE
Line Interface (CLI) is not supported.
Installing Cisco Configuration Assistant
To install CCA on your PC:
Go to this web address to download CCA:
S 1
TEP
go/configassist.
To access the software, you must be a registered user on
Cisco.com.
Click the Download Software link in the Support box.
S 2
TEP
Enter your Cisco.com Username and Password and click Log In.
S 3
TEP
Click Cisco Configuration Assistant. Then select the largest
S 4
TEP
numbered file under Latest Releases (for example, Cisco-config-
assistant-win-k9-2_1-en.exe).
Run the installer and follow the prompts. The install wizard will
S 5
TEP
guide you through the installation process.
When the setup is complete, click Finish.
S 6
TEP
Launch CCA by clicking the CCA icon on your desktop.
S 7
TEP
The Application Update Check window appears.
Check that you are using the latest version of CCA and install it if
S 8
TEP
required.
Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
http://www.cisco.com/
15