Table of Contents
Advertisement
User Tab
Speed Dial
Field
Speed Dial 2/3/4/5/6/7/8/9
Supplementary Services
The 900 Series phone provides native support of a large set of enhanced or supplementary
services. All of these services are optional. The parameters listed in the following table are
used to enable or disable a specific supplementary service. A supplementary service should be
disabled if a) the user has not subscribed for it, or b) the Service Provider intends to support
similar service using other means than relying on the 900 Series phone.
Field
CW Setting
Block CID Setting
Block ANC Setting
DND Setting
Secure Call Setting
Dial Assistance
Auto Answer Page
Preferred Audio Device
Send Audio to Speaker
Linksys 900 Series IP Phone Administrator Guide
5-50
Description
Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9.
The default is blank.
Description
Enables or disables call waiting.
The default is Yes.
Block Caller ID on/off for all calls.
The default is no.
Block Anonymous Calls on or off.
The default is no.
DND on or off.
The default is no.
If yes, all outbound calls are secure calls by default.
The default is no.
If enabled, the phone LCD displays a list of up to 10 matching numbers as the user
presses each key on the numeric keypad.
If enabled, the phone automatically picks up a call and directs the audio signal to
the speakerphone without user intervention.
Specifies the preferred audio device (Speaker or Headset). When set to Speaker,
the user can enable the headset using the Preferences > Preferred Audio Device
(Menu 5,6) option. When set to Headset, the same option is used to enable the
speakerphone.
If enabled, when the user is using the handset, the audio from the remote end will
be played out on the speaker in addition to the handset (so that a supervisor and
listen in).
Chapter 5
SPA900 Series Phone Field Reference
Document Version 3.0
Advertisement
Table of Contents
