The Setup Menu - Sony VPL-MX20 Operating Instructions Manual

The Setup Menu

The Setup menu is used for changing the settings of the projector.
Setting items
Status
Language
Start Up Image
High Altitude
Mode
Standby Mode
Power Saving
Mode
40
The Setup Menu
Functions
• On: Sets whether or not the on-screen display is
displayed.
• Off: Turns off the on-screen displays except for the
menus, message when turning off the power, and
warning messages.
Selects the language used in the menu and on-screen
displays.
• On: Displays the Start Up Image on the screen after
turning on the power.
• Off: Does not displays the Start Up Image on the
screen after turning on the power.
Use this item when using the projector at high
altitudes.
• On: Use this setting when using the projector at an
altitude of 1,500 m or higher.
• Off: Use this setting when using the projector at
normal altitudes.
• Standard: Power consumption is normal.
• Low: Lowers power consumption in standby mode.
Selects the power saving mode.
• Lamp Cutoff: The lamp goes off and the
lights in orange if no signal is input for 10 minutes.
The lamp lights again when a signal is input or any
key is pressed.
• Standby: The projector goes into standby mode and
? 1
the / key lights in red if no signal is input for 10
minutes. To use it, turn on the power again.
• Off: The projector does not go into power saving
mode.
Initial setting
On
English
On
Off
Low
Off
? 1
/ key