System Board Switches - HP Workstation x2000 Supplementary Manual

System Board Switches

Default Switch
Position
1-4 OFF
5 ON
6 ON
7 OFF
8 OFF
9 OFF
10 ON
BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history
refer to the HP World Wide Web site. The BIOS is in the form
IY.W1.yy.zz
where:
yy= BIOS version number
zz = is the selected language to be downloaded
Go to:
http://www.hp.com/workstations/support
Main Memory
The HP x2000 has two pairs of memory sockets for installing either two
or four RAMBUS Direct RAM (RDRAM) memory modules.
Each pair of memory sockets must contain identical memory modules
(identical in size, speed and type). That is, sockets A1 and B1 must
contain identical modules, and sockets A2 and B2 must contain identical
modules (or continuity modules).
Chapter 1
System Board Connectors, BIOS, and Memory
Use
Reserved. Do not change Default Settings
Reserved. Do not change Default Setting
Enables keyboard power-on.
OFF disables this option.
Enables normal modes.
ON enables the BIOS recovery mode at
next boot.
Retains CMOS memory.
ON clears CMOS memory at next boot.
Enables User and System Administrator
passwords.
ON clears the passwords at next boot.
ON = Minitower chassis
HP x2000 Service Information
9