Table of Contents
Advertisement
1
MENU button
Press the
appear. Press
the POINT LEFT/RIGHT buttons to select
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will
2
Press the POINT DOWN button and a red-arrow icon will
Move the
arrow to the item that you want to adjust by
pressing
the POINT
value, press either
POINT
LEFT button.
Color
Press
POINT LEFT button to lighten the image, and
POINT RIGHT button
Tint
Press POINT LEFT button to increase purple, and press POINT
RIGHT button to increase green. (From 0 to 63.)
White balance (Red I Green I Blue)
Move the arrow to the color that you want to adjust. Press
POINT LEFT button to lighten the color, and press POINT
RIGHT button to
deepen the color. (From 0 to 63.)
Contrast
Press POINT LEFT
RIGHT
POINT
button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to darken the image, and press POINT
RIGHT button to brighten the image. (From 0 to 63.)
Sharpness
LEFT button
Press POINT
RIGHT button to sharpen the image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 16.)
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
•..
Stored
Stores the data in the memory.
....
Quit
Closes the PICTURE IMAGE ADJUSTMENT Menu.
NORMAL FUNCTION
The normal picture level is preset on restored anytime you press the
NORMAL button (located on the Top Control or on the Remote
Control Unit). The "Normal" display will be displayed on the screen
for a few seconds. this projector at the factory and can be
ADJUSTING THE PICTURE IMAGE
and the ON-SCREEN MENU will
appear.
UP/DOWN buttons.
POINT
the
RIGHT button or the
deepen
image.
to
the
button to decrease contrast, and press
to soften the image, and press POINT
IMAGE
appear.
change
To
the
press
(From 0 to 63.)
31
Advertisement
Table of Contents
