Table of Contents
Advertisement
DIRECT OPERATION
Select VIDEO mode by pressing the MODE button on the Top
Control or the VIDEO button on the Remote Control Unit.
MENU OPERATION
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select Video
and press the SELECT button.
This projector automatically detects the signal from the VIDEO INPUT JACK(s) or the S-VIDEO INPUT JACK. When
those jacks are connected at the same time, select the type of Video source in VIDEO SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
VIDEO SOURCE and press the SELECT button. Another
VIDEO SOURCE Menu will
dialog box
Press the POINT DOWN button and a red-arrow
2
will appear. Move the arrow to the source that you want to
select, and then press the SELECT button.
Auto
The projector automatically detects the incoming Video source,
and adjusts itself to optimize its performance.
• When both VIDEO jack and S-VIDEO jack are connected, the 5-
VIDEO jack has priority over the VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are connected,
the Y-Pb/Cb-Pr/Cr jacks has priority over the S-VIDEO jack.
Video I S-Video I Y, PbICb, PrICr
When the VIDEO INPUT JACK(s) and the S-VIDEO INPUT JACK
are connected at the same time, or if the projector cannot chose the
proper video source, it is necessary to select a specific video source
among Video, S-Video and Y, Pb/Cb, Pr/Cr.
appear.
icon
29
Advertisement
Table of Contents
