Drum unit, Ozone filter, Toner filter replacement instructions
A
B
O K
[1]
[1]
A2WUF2C060DA
[1]
N G
C
A2WUF2C061DA
A2WUF2C062DA
3. Put the drum unit on the developing
unit.
NOTE
• Do not tilt the drum unit when put-
ting it on the developing unit. (Keep
the drum unit level.)
• Position the drum unit so that part
A of the drum unit is inserted into
part B of the developing unit.
NOTE
• Position the drum unit so that part
C of the drum unit is inside the film
[1] located on the main body rail.
(Check that Part C is not on the top
of the rail.)
4. Remove the protective sheet [1] for
the PC drum.
3