Hardware Monitor - Asus M2N32-SLI Premium VISTA Edition User Manual

4.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
CPU Q-Fan Control
x CPU Q-Fan Profile
Chassis Q-Fan Control
x Chassis Q-Fan Profile
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU FAN Speed
CHA_FAN1 Speed
CHA_FAN2 Speed
CHA_FAN3 Speed
CHA_FAN4 Speed
PWR_FAN Speed
CHIP_FAN Speed
CPU Fan Speed warning
F1:Help
ESC: Exit
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The CPU Q-Fan Profile item becomes use-configurable when you enable the
CPU Q-Fan Control item.
CPU Q-Fan Profile [Performance]
Allows you to set the appropriate performance level of the CPU Q-Fan. When
set to [Optimal], the CPU fan automatically adjusts depending on the CPU
temperature. Set this item to [Silent] to minimize fan speed for quiet CPU fan
operation, or [Performance] to achieve maximum CPU fan speed.
Configuration options: [Performance] [Optimal] [Silent]
Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the chassis Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The succeeding item becomes user-configurable when you set the Chassis
Q-Fan Control item to [Enabled].
4-36
Phoenix-AwardBIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Disabled]
Performance
[Disabled]
Performance
[ 1.39V]
[ 2.76V]
[ 4.48V]
[11.32V]
42ºC
41ºC
3068 RPM
0 RPM
0 RPM
0 RPM
0 RPM
0 RPM
0 RPM
[ 800 RPM]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup