HTC Touch Diamond2 Quick Start Manual page 8

8 Quick Start Guide
To install the battery
1.
Align the battery's exposed copper contacts
with the battery connectors at the bottom
part of the battery compartment.
2.
Insert the contacts side of the battery first and
then gently push the battery into place.
3.
Replace the back cover.
To install a microSD
Locate the storage card slot, then insert the
microSD card into the slot with its gold contacts
facing down until it clicks into place.
Note
To remove the microSD card, press it to eject it
from the slot.
For information on how to remove or replace these components on your device, refer to
the "Getting Started" chapter in the User Manual PDF.
card
™
Storage
card slot
Notch