Charging The Battery; Starting Up - HTC Touch Diamond2 Quick Start Manual

5. Charging the Battery

New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery.
To charge the battery
1.
Connect the USB connector of the AC adapter to the sync connector at the bottom
of your device.
2.
Plug in the AC adapter to an electrical outlet to start charging the battery.
The battery is fully charged after about 3 hours of charging.

6. Starting Up

After installing the battery and charging the battery, you can now power on and start
using your device.
To turn on the power
Press the POWER button. On first time use, the device installs customized settings, and
then displays the SIM Card Changed screen.
Configuring initial device settings
The SIM Card Changed screen gives you the option to automatically configure your
device's data connections, such as 3G/EDGE/GPRS, MMS, and WAP and/or import SIM card
contacts to your device (if available).
Follow the onscreen instructions to proceed. After you have configured your data
connections and copied SIM contacts to your device, the device restarts and then displays
the TouchFLO 3D Home screen.
Quick Start Guide 9