Detaching The Port Replicator - Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz User Manual

Port replicator
Hide thumbs Also See for S6520 - LifeBook - Core 2 Duo 2.4 GHz:
Table of Contents


Installing a Fujitsu LifeBook E8000 notebook:
1. Unplug the AC adapter from the system if it is connected
and any other connectors that are attached to the back
of the system.
2. If the alignment bar is in a vertical position, press it
forward so that is lies flat against the bottom of the port
replicator, and it clicks into place. (Figure 3)
3. Position the system so that the left side is aligned with
the left stop. (Figure 4)
4. Push your notebook down to connect it securely to the
port replicator.
5. Plug the AC adapter into the DC power jack on the port
replicator and plug the other end into a power outlet.
Attach any peripheral devices to the port replicator.


The port replicator can be detached from your notebook
while the power is on, while in suspend mode, or while the
power is off. To detach the port replicator follow these steps:
1. Pull the port replicator latch release outwards. (Figure 5)
2. While holding the port replicator latch release, lift your
notebook to detach it from the port replicator.
Figure 5. Detaching the notebook


Table of Contents

Subscribe to Our Youtube Channel

This manual is also suitable for:


Table of Contents