Setting A Destination Using An Item In The History List - Nextar Q4-01 Hardware Instruction Manual

•
Tap GO to calculate the route and start the turn-by-turn instructions.
—Or—
Tap SAVE & GO to save the destination as a location in the Favorites list before
receiving turn-by-turn instructions. The system will prompt you to enter a location
name.
—Or—
Tap SET ORIGIN to set this location as the vehicle starting position.
Setting a Destination Using an Item in the
History List
The History button accesses a compiled list of destinations you recently calculated in
the GPS. The system saves the last 50 unique positions to this list. You may use this list
to set a destination, as described next.
To set a destination using the History list
1. From the main screen, tap MENU, and then choose HISTORY. The Destination
History screen opens. (See the example below.)
Destination History screen
2. Select an item form the list, and then tap GO to calculate the route and start the
turn-by-turn instructions. Alternatively:
Tap SAVE & GO to save the destination as a location in the Favorites list
-
before receiving turn-by-turn instructions. The system will prompt you to
enter a location name.
—Or—
Tap SET ORIGIN to set this location as the vehicle starting position.
-
37