Nextar Q4-01 Hardware Instruction Manual page 37

6. Tap on the city name that matches the one you are looking for. At this point, two
possible things will happen.
The system will display the list of matching POIs for the selected category.
-
—OR—
The system prompts you to enter the POI name. Begin spelling out the item.
-
Within a few characters, the system will display the matching list.
7. Select the desired POI from the displayed list. The system next shows the
Destination Confirmation for the selected destination.
8. Next—
Tap GO to calculate the route and start the turn-by-turn instructions.
-
—OR—
Tap SAVE & GO to save the destination location in the Favorites list before
-
receiving turn-by-turn instructions. The system will prompt you to enter a
location name. The system will then provide turn-by-turn instructions to that
destination from your current location.
—Or—
Tap SET ORIGIN to set this location as the starting position, e.g., to plan a
-
route using a different starting point.
10